Gongyi has drawn self-inspection before the three installations of the two-axis shredder through many years of experience, please ask the newbie to install the next step. If the fixedness of the biaxial tear machine is not fixed, it is easy for a long time to be a shredder to become unstachable. Xiaobian once again reminded: The rope is always broken, and the accident often appears in the weak link!

It should be noted that we need to install a switch to control the knife outside the shredder. We have to choose a suitable line to route to ensure the normal operation of the double-axis shredder. Once there is a problem, it can directly cut off the circuit. The installation of the biaxial tear machine is fixed to ensure that there is no loose phenomenon. If the time is long, it will cause the vibration to exacerbate, and the noise of the shredder is getting bigger and bigger, and it is easy Cause damage to the shredder, so we have to fix a biaxial tear machine to ensure long-term normal production work.

This phenomenon will be ignored by many people, because there is no impact because it feels, but the result is exactly the contrary, big problems are caused by small problems. 3, the double-axis shredder must be tested in the installation completion, open the biaxial tear machine for idle, and after a few minutes, if there is no single shaft shredder machine abnormal situation, it will show that our biaxial tear machine has been installed, which can be produced.What three points do you need to know before the shredder installation?

Environmentally friendly biaxial tear machine has become universal equipment in thousands of industries, it has become one of the indispensable environmental equipment in this era, currently, buy tear Some users behind the machine, Xiaobian wants you to explain three points you need to pay attention to before installation

Megosztás a facebookon

It is the main part of the screen machine. Motor pedestal: To install the vibration motor, the connecting screws must be tightened before use, especially three days before the trial of the new screen, it must be tightened repeatedly Industrial double shaft shredder machine to avoid loosening and causing accidents. Vibration damping spring: prevent vibration from being transmitted to the ground, while supporting the full weight of the screen box.

Vibration motor: (Please refer to the instruction manual of vibration motor for details of usage and maintenance methods). Screen: There are several kinds of screens such as low-carbon steel, brass, bronze, stainless steel wire and so on. Structural components of linear vibrating screen. It is mainly composed of a screen box, a screen frame, a screen mesh, a vibration motor, a motor base, a vibration damping spring, a bracket, etc. When installing, the spring must be perpendicular to the ground.

Screen frame: It is made of pine wood or wood with small deformation, which is mainly used to keep the screen flat and achieve normal screening.Structural components and application fields of linear vibrating screen Adopting block eccentric self-synchronizing vibration exciter; Adopting elastic coupling and universal coupling connection with tape; Applying modern technology such as modal analysis to ensure the dynamic performance of the machine, and optimize the structural design to improve the reliability and working life of the whole machine.

The pillars must be perpendicular to the ground during installation, and the channel steels under the two pillars should be parallel to each other.. Linear vibrating screens are widely used in coal preparation, mineral processing, building materials, electric power and other industries, and are suitable for dry and wet classification of medium and fine-grained materials, or occasions such as dehydration and de-intermediation and de-sliming.

Support: It is composed of four pillars and two channel steels, supporting the screen box. Screen box: It is welded by several steel plates with different thicknesses, and has certain strength and rigidity.

Megosztás a facebookon